Example micromachined parts
Precise positioning pin
The 35mm high brass element contains two drilled holes with diameters of 100 and 500 micrometers.
Micromachined positioning pin with drilled 100 and 500 micrometers hrough holes
Microscopic view of the 100 micrometers drilled hole.
Appllication of our products
X-ray pin hole
The pin hole is used as a objective in camera obscura setup. It is used to monitor the x-ray source anode spot. The pin hole properties are:
Microscopic image of the pin hole. Red circle shows the hole diameter (φ = 27.25µm).
A set of two 10mm W pin holes.